You have no items in your shopping cart.
Details
Details
1/5 scale vehicles require some serious horsepower and the HobbyStar 56112 1/5 scale motor delivers the power you need. With an industry leading 24 slot stator and a 4-pole precision-balanced, Kevlar-wrapped rotor riding on buttery-smooth ABEC5 bearings all housed in a beautifully CNC machined T6 6061 billet-aluminum housing you'll harness next-level power for your large-scale RC! Extra long 200mm motor leads with gold-plated terminals already installed make installation a snap.
Features:
- 4-Pole 24 Slot high-torque motor design
- CNC machined 6061 T6 billet aluminum heatsink can
- High purity copper windings maximize efficiency
- High RPM ABEC5 oversized bearings
- Universal fit with multiple M4 mounting holes
- Precision balanced Kevlar-wrapped rotor, smoothness for best reliability and maximum RPM
- Stator - Super thin (0.2mm) laminations
- Removable/Replaceable rotor
- Precision engineered for maximum energy conversion
| Product | KV (RPM/Volt) | Max Voltage | Max Amps | Rotor Poles | IO | Resistance | Watts | Max RPM | Length (mm) | Diameter (mm) | Weight (g) | Shaft Diameter (mm) | Shaft Length (mm) | Connectors |
| 56112/3Y | 580 | <53V | 140A | 4 | 1.9A | 0.0148 | 7500W | 30,000 | 112mm | 55/56.8 with fins |
1150 | 8 | 30 | 8.0mm gold |
| 56112/4D | 780 | <40V | 180A | 4 | 2.4A | 0.0083 | 7500W | 30,000 | 112mm | 55/56.8 with fins |
1150 | 8 | 30 | 8.0mm gold |
| 56112/2Y | 840 | <37V | 200A | 4 | 2.8A | 0.0081 | 7500W | 30,000 | 112mm | 55/56.8 with fins |
1150 | 8 | 30 | 8.0mm gold |
| 56112/1.5Y | 980 | <34V | 210A | 4 | 3.8A | 0.0058 | 7500W | 30,000 | 112mm | 55/56.8 with fins |
1150 | 8 | 30 | 8.0mm gold |
| 56112/2.5T | 1150 | <28V | 262A | 4 | 4.5A | 0.0032 | 7500W | 30,000 | 112mm | 55/56.8 with fins |
1150 | 8 | 30 | 8.0mm gold |
Reviews
Customer Reviews (4)
- Best motor Longside 2028 Review by Kevon Rc guy
-
I have two 980KV in my Arrma Outcast 8S and Kraton 8s Lots of power great deal (Posted on 6/19/2021)Price Value Quality - AmazingReview by Brandon
-
I have the 980kv variant in my xmaxx with MMX8S and it’s crazy running 40/50 gearing. Make sure your batteries are up to the TASK!!! (Posted on 5/9/2021)Quality Price Value - 5 stars all around Review by T&L Custom RC’s
-
These are great motors I have run multiple kv ones in my 1/5 scales. The 980kv in my arrma outcast with a Max5 esc and it’s a monster. Also run the 580kv in a kraken vekta for the past 3 years on 12s and it’s been great. These motors are worth every penny especially with the cost significantly less then other brands on the market. (Posted on 3/31/2021)Price Value Quality - Good price Review by Roland
-
Good motor and combo with max5 with 19t pinion on my losi dbxl-e (Posted on 6/12/2020)Price Value Quality
Tags
Ask Question
Can I install this engine in my E Revo 2.0 VXL 6s brushless? Thanks in advance!!!
A:
Unfortunately no, this is a 1/5 sized motor which is far too large for a Revo.
RCJuice answered on August 19, 2019
What size bearings do these motors use?
A:
OD: 22mm
ID: 8mm
Thickness: 7mm
ID: 8mm
Thickness: 7mm
RCJuice answered on May 29, 2020
Hi do you think the 840kv would be suitable for a Losi 5iveB without getting too hot. It will weigh 14kg RTR, 15T pinion, or maybe the 780kv better?
A:
What voltage are you running?
RCJuice answered on February 9, 2019
Is it ok to shorten motor wires?
A:
It is, but keep in mind that the solder joint must be done correctly to ensure proper operation. The larger motors take a lot of heat and some time to ensure good solder penetration.
RCJuice answered on April 26, 2019
Hi would this be more suited to a baja 5b than the leopard 58110/58113 without being underpowered??
A:
It is a comparable motor, as far as overall power it depends on KV/Voltage/Gearing but you can make the same power with these motors, very popular in the 1/5 rigs.
RCJuice answered on December 3, 2018
Recommended For You
You may also be interested in the following product(s)
Customers who bought this item also bought
Check items to add to the cart or select all
