You have no items in your shopping cart.
Details
Details
A terrific all-around ESC, the HobbyStar 60A Brushless ESC packs a lot of features without breaking the bank. Smooth-operation, a built in BEC and plenty of available adjustments via LED program card and it even comes with silicone wire leads already soldered on (4.0mm bullet-plugs on motor wires and a Dean’s-style t-plug on power leads). Sensored design means it can be run with sensored or sensorless brushless motors.
FEATURES:
- Enhanced throttle response, smooth acceleration, strong brake function and linear throttle
- High-quality components, high-current capable
- Excellent start-up, acceleration and linearity
- Built-in 6V, 3A Linear BEC
- Sensor port for running sensored motors (can also run sensorless)
- Fully programmable, can be programmed with LED Program Box
- Multiple protection features: Low voltage cut-off, Overheat protection, Throttle signal loss protection
SPECIFICATIONS:
- Output: Continuous 60A, Burst 380A
- Input: 5-10 cells NiMH/NiCd or 2-3S LiPo
- BEC: 6V/2A
- Resistance: 0.0007 ohm
- Motor supported: Brushless sensored/sensorless
- Application: 1/12, 1/10 on and off-road car (not recommended for heavy 4x4 applications or larger than 540 sized motor)
- Programmable items: motor timing, initial acceleration, running mode, brake %, drag brake, cut-off voltage, throttle limit, motor rotation, & neutral range
- Size: 42mm(L) x 28mm(W) x 25m(H, to top of heat-sink)
- Weight: 60g (without wires)
Reviews
Tags
Ask Question
Does this have blinky mode
A:
No, for a blinky mode you'd need this 60A ESC: https://www.rcjuice.com/motor-esc/car-esc-s/1-12-1-10-short-course-esc-s/hobbystar-60a-1-10-competition-sensored-esc-with-turbo-boost-v2.html
RCJuice answered on December 24, 2018