You have no items in your shopping cart.
Details
Details
A terrific all-around ESC, the HobbyStar 60A Brushless ESC packs a lot of features without breaking the bank. Smooth-operation, a built in BEC and plenty of available adjustments via LED program card and it even comes with 12AWG silicone wire leads already soldered on (4.0mm bullet-plugs on motor wires and a Dean’s-style t-plug on power leads).
FEATURES:
- Enhanced throttle response, smooth acceleration, strong brake function and linear throttle
- High-quality components, high-current capable
- Excellent start-up, acceleration and linearity
- Built-in 6V, 3A Linear BEC
- Fully programmable, can be programmed with LED Program Box
- Multiple protection features: Low voltage cut-off, Overheat protection, Throttle signal loss protection
SPECIFICATIONS:
- Output: Continuous 60A, Burst 380A
- Input: 5-10 cells NiMH/NiCd or 2-3S LiPo
- BEC: 6V/2A
- Resistance: 0.0007 ohm
- Motor supported: Brushless sensorless
- Application: 1/12, 1/10 on and off-road car (not recommended for heavy 4x4 applications or larger than 540 sized motor)
- Programmable items: motor timing, initial acceleration, running mode, brake %, drag brake, cut-off voltage, throttle limit, motor rotation, & neutral range
- Size: 34mm(L) x 28mm(W) x 25m(H, to top of heat-sink)
- Weight: 60g (without wires)
Reviews
Tags
Ask Question
Ok here we go, Will this ESC work with a 2845 4370kv 4 pole motor. Smaller motor can then a 540, system is going in a 1/14 Scale 4wd Truggy. Any info
A:
There shouldn't be a problem using this esc, other than the fact it will have a larger physical footprint than your average 1/14 scale esc has.
RCJuice answered on January 21, 2020
Im looking for a waterproof esc for a 4wd slash any recomdations?
A:
The fan and switchare not fully waterproof, but the main ESC is: https://www.rcjuice.com/hobbystar-80a-brushless-sensorless-esc-2-4s.html
RCJuice answered on March 4, 2019