You have no items in your shopping cart.
Details
Details
Large scale vehicles require some serious horsepower and the HobbyStar 5692 1/5 scale motor delivers the power you need. 92mm can length for versatile fit in smaller rigs. With an industry leading 24 slot stator and a 4-pole precision-balanced rotor riding on buttery-smooth ABEC5 bearings all housed in a beautifully CNC machined T6 6061 billet-aluminum housing you'll harness next-level power for your large-scale RC! Extra long 200mm motor leads with gold-plated terminals already installed make installation a snap.
Features:
- 4-Pole 24 Slot high-torque motor design
- CNC machined 6061 T6 billet aluminum heatsink can
- High purity copper windings maximize efficiency
- High RPM ABEC5 oversized bearings
- Universal fit with multiple M4 mounting holes
- Precision balanced rotor, smoothness for best reliability and maximum RPM
- Stator - Super thin (0.2mm) laminations
- Removable/Replaceable rotor
- Precision engineered for maximum energy conversion
| Product | KV (RPM/Volt) | Max Voltage | Max Amps | Rotor Poles | IO | Resistance | Watts | Max RPM | Length (mm) | Diameter (mm) | Weight (g) | Shaft Diameter (mm) | Shaft Length (mm) | Connectors |
| 5692/2.5Y | 850 | <35V | 148A | 4 | 2.2A | 0.0135 | 5200W | 30,000 | 92mm | 55/57.8 with fins |
1020 | 8 | 30 | 8.0mm gold |
| 5692/2Y | 1120 | <27V | 195A | 4 | 3.2A | 0.0072 | 5200W | 30,000 | 92mm | 55/57.8 with fins |
1020 | 8 | 30 | 8.0mm gold |
Reviews
Tags
Ask Question
Can this motor be fitted to work in an Traxxas Xmaxx?
A:
We do not have an Xmaxx here to test, but we do know that a lot of guys are running the Leopard 5892 in the Xmaxx. Since this motor is 2mm smaller in diameter I believe it would fit but just cannot guarantee since we can''t physically check.
RCJuice answered on December 22, 2017
I have the sky beast esc will these connections fit right in or do I need an adapter?
A:
Both the ESC and motor have 8mm bullet connectors, should not be an issue.
RCJuice answered on May 19, 2021
Does this motor mount directly to 1/8 scale standard motor mount?
Is there any 1/5 scale motor with 1/8 motor mount holes other than the 5685 moto?
A:
No, this will not mount to an 1/8 mount. 1/5 motors have a much larger diameter than the 1/8 motors, if mounted to a standard 1/8 motor mount, it would not allow enough clearance of the chassis.
We do not have any 1/5 motors with an 1/8 mount pattern. Our 1/7 motor has the same pattern as the 1/8 but as I stated before, you would want to check the clearance first.
We do not have any 1/5 motors with an 1/8 mount pattern. Our 1/7 motor has the same pattern as the 1/8 but as I stated before, you would want to check the clearance first.
RCJuice answered on February 18, 2020
Can it handle an 8s battery or higher?
A:
The motor can handle 8S, but it still needs to be set up correctly. Temps must be monitored and gearing changed if necessary, any motor can overheat to the point of destruction even when run well below the recommended voltage if overgeared. A good read on the subject: https://www.rcjuice.com/power_system_setup
RCJuice answered on May 14, 2018
Recommended For You
You may also be interested in the following product(s)
Customers who bought this item also bought
Check items to add to the cart or select all
