HobbyStar Waterproof 60A Brushless Sensorless ESC

SKU: 360-10-057

Availability: Out of stock




HobbyStar 60A ESC includes plenty of programmable options and it's versatile waterproof design allows you to drive in extreme conditions. Motor leads come with pre-installed 4.0mm gold-plated bullet plugs for easy, no-soldering connection and ESC is equipped with Dean's style t-plug on power leads.


NOTE: In order to make fan replaceable, the plug is a standard design so it is advised to unplug fan if running in heavy water conditions.



  • High-quality components, high-current capable
  • Excellent start-up, acceleration and linearity
  • Built-in 6V, 3A Linear BEC
  • Built-in cooling fan
  • Fully programmable, can be programmed with LED Program Box


  • Output: Continuous 60A, Burst 380A
  • Input: 5-10 cells NiMH/NiCd or 2-3S LiPo
  • BEC: 6V/3A 
  • Resistance: 0.0007 ohm
  • Motor supported: Brushless sensorless
  • KV Limits: 2S KV≤5200  3S KV≤3400
  • Application: 1/12, 1/10 on and off-road car (not recommended for 4x4 applications)
  • Size: 41mm(L) x 33mm(W) x 35m(H)
  • Weight: 104g)

NOTE: ESC is rated for 2S and 3S operation, but certain KV's of motors are only rated to 2S.  Please ensure you follow the guidelines of the motor paired to this ESC in order to avoid damage to ESC.  Not recommended for 4x4 applications.



Customer Reviews (1)

Excellent esc Review by Edwin
Just received it yesterday. Installed it immediately. First, I replaced the 4mm connectors with 3mm. Throttle calibration very easy. Only downside is you need the program card if you want to change any setting. No manual setting can be made. Will get my card next order. Fan is very strong and seems to blow according to temperature increase. 9 / 10 verdict from me. Great ESC. Would buy it again if needed. (Posted on 7/22/2020)

Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.

Ask Question

Create New Question

Please Sign up or Log in to ask a question
What programming card is this ESC compatable with? I tried it with my current Hobbystar programming card and it doesn't recognize it.
Make sure you are plugging into the program lead, this ESC has both a signal lead that goes to the RX and also a separate lead for programming. It takes the LED program card: https://www.rcjuice.com/motor-esc/program-cards-usb-links/hobbystar-led-program-card.html
RCJuice answered on December 17, 2018
Do you manually program the throttle end points/position to your transmitter with this ESC or does it do it for you automatically when you turn it on?
As per the instruction sheet, you will need to go through the calibration process before normal operation.
RCJuice answered on April 13, 2020