HobbyStar 1/10 Combo, 60A ESC and 540 Brushless 4-Pole Motor, Includes Program Card

SKU: 385-42-BND

Availability: In stock

$74.99
Program Card:
1 x HobbyStar LED Program Card  
ESC:
1 x HobbyStar 60A Brushless Sensorless ESC  
Motor:
HobbyStar



Details

Details

A complete power package with a HobbyStar 60A brushless ESC, 540 brushless motor and an LED program card to dial it all in.  4-pole motor for maximum torque makes this combo ideal for a wide array of 1/10 scale vehicles from 2WD to 4WD.

A terrific all-around ESC, the HobbyStar 60A Brushless ESC packs a lot of features without breaking the bank.  Smooth-operation, a built in BEC and plenty of available adjustments via LED program card and it even comes with 12AWG silicone wire leads already soldered on (4.0mm bullet-plugs on motor wires and a Dean’s-style t-plug on power leads).

 

FEATURES:

  • Enhanced throttle response, smooth acceleration, strong brake function and linear throttle
  • High-quality components, high-current capable
  • Excellent start-up, acceleration and linearity
  • Built-in 6V, 3A Linear BEC
  • Fully programmable, can be programmed with LED Program Box
  • Multiple protection features: Low voltage cut-off, Overheat protection, Throttle signal loss protection

 

SPECS:

  • Output: Continuous 60A, Burst 380A
  • Input: 5-12 cells NiMH/NiCd or 2-4S LiPo
  • BEC: 6V/2A 
  • Resistance: 0.0007 ohm
  • Motor supported: Brushless sensorless
  • Application: 1/12, 1/10 on and off-road car (not recommended for very heavy 4x4 applications))
  • Programmable items: motor timing, initial acceleration, running mode, brake %, drag brake, cut-off voltage, throttle limit,  motor rotation, & neutral range
  • Size: 34mm(L) x 28mm(W) x 25m(H, to top of heat-sink)
  • Weight: 60g (without wires)

 

The HobbyStar 540 4-pole brushless, sensorless motor is perfect where a high-torque, high-performance powerplant is required.  A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle.  Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.

Features:

  • 4-pole 12-slot high-torque design
  • CNC machined 6061 T6 billet aluminum can
  • High-purity copper windings maximize efficiency
  • High-RPM ABEC5 oversized bearings
  • Precision balanced rotor for smooth operation and maximum RPM
  • Super-thin (0.2mm) stator laminations 
  • Removable/replaceable rotor
  • Precision Engineered for maximum energy conversion

 

Product KV (RPM/Volt) Max Voltage Max Amps Rotor Poles IO Resistance Watts Max RPM Length (mm) Diameter (mm) Weight (g) Shaft Diameter (mm) Shaft Length (mm) Connectors
540/3Y 3100 3S 56A 4 1.4A 0.0116 900W 50,000 50 36 180 3.175 15 4.0mm gold
540/5T 3400 3S 61A 4 1.7A 0.0108 900W 50,000 50 36 180 3.175 15 4.0mm gold
540/4.5T 3900 2S 69A 4 2.0A 0.0081 900W 50,000 50 36 180 3.175 15 4.0mm gold
540/4T 4300 2S 75A 4 2.7A 0.0075 900W 50,000 50 36 180 3.175 15 4.0mm gold
540/3.5T 5200 2S 94A 4 3.7A 0.0051 900W 50,000 50 36 180 3.175 15 4.0mm gold
540/3T 5800 2S 107A 4 5.2A 0.0043 900W 50,000 50 36 180 3.175 15 4.0mm gold

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Ask Question

Product Questions

  • Submit your question to our community.


Recommended For You

You may also be interested in the following product(s)

Questions?