Details
Details
A complete power package with a HobbyStar 60A brushless ESC, 550 brushless, sensorless motor and an LED program card to dial it all in. 550 length and 4-pole design for maximum torque makes this combo ideal for your 2WD short course truck.
A terrific all-around ESC, the HobbyStar 60A Brushless ESC packs a lot of features without breaking the bank. Smooth-operation, a built in BEC and plenty of available adjustments via LED program card and it even comes with 12AWG silicone wire leads already soldered on (4.0mm bullet-plugs on motor wires and a Dean’s-style t-plug on power leads).
NOTE: While the ESC in this kit is rated for 3S, 2S should not be exceeded on 3500KV and above motors.
FEATURES:
- Enhanced throttle response, smooth acceleration, strong brake function and linear throttle
- High-quality components, high-current capable
- Excellent start-up, acceleration and linearity
- Built-in 6V, 3A Linear BEC
- Fully programmable, can be programmed with LED Program Box
- Multiple protection features: Low voltage cut-off, Overheat protection, Throttle signal loss protection
SPECS:
- Output: Continuous 60A, Burst 380A
- Input: 5-12 cells NiMH/NiCd or 2-4S LiPo
- BEC: 6V/2A
- Resistance: 0.0007 ohm
- Motor supported: Brushless sensorless
- Application: 1/12, 1/10 on and off-road car (not recommended for very heavy 4x4 applications)
- Programmable items: motor timing, initial acceleration, running mode, brake %, drag brake, cut-off voltage, throttle limit, motor rotation, & neutral range
- Size: 34mm(L) x 28mm(W) x 25m(H, to top of heat-sink)
- Weight: 60g (without wires)
The HobbyStar 550 4-pole brushless, sensorless motor is based on the same design as our powerhouse 540 sensorless motor, but features a longer 550 sized can for extra torque. The perfect motor when a high-torque, high-performance powerplant is required such as 4x4 short-course trucks. A beautifully machined T6 billet-aluminum housing contains a 4-pole, 12-slot high-torque rotor spinning on High-RPM ABEC5 oversized bearings for a powerful, reliable motor choice for your 1/10 scale vehicle. Comes with motor leads with 4.0mm bullet connectors already installed. Available in a wide variety of KV ratings.
FEATURES:
- 4-pole 12-slot high-torque design
- CNC machined 6061 T6 billet aluminum can
- High-purity copper windings maximize efficiency
- High-RPM ABEC5 oversized bearings
- Precision balanced rotor for smooth operation and maximum RPM
- Super-thin (0.2mm) stator laminations
- Removable/replaceable rotor
- Precision Engineered for maximum energy conversion
550/3Y235021V57A41.3A0.01521200W50,00055361953.175174.0mm gold
Product | KV (RPM/Volt) | Max Voltage | Max Amps | Rotor Poles | IO | Resistance | Watts | Max RPM | Length (mm) | Diameter (mm) | Weight (g) | Shaft Diameter (mm) | Shaft Length (mm) | Connectors |
550/3.5Y | 1950 | 4S | 46A | 4 | 1.2A | 0.0231 | 1200W | 50,000 | 55 | 36 | 195 | 3.175 | 17 | 4.0mm gold |
550/5T | 2600 | 3S | 63A | 4 | 1.5A | 0.0146 | 1200W | 50,000 | 55 | 36 | 195 | 3.175 | 17 | 4.0mm gold |
550/2Y | 3500 | 3S | 85A | 4 | 2.5A | 0.0089 | 1200W | 50,000 | 55 | 36 | 195 | 3.175 | 17 | 4.0mm gold |
550/3.5T | 3800 | 2S | 92A | 4 | 2.8A | 0.0083 | 1200W | 50,000 | 55 | 36 | 195 | 3.175 | 17 | 4.0mm gold |
550/3T | 4300 | 2S | 100A | 4 | 3.7A | 0.0058 | 1200W | 50,000 | 55 | 36 | 195 | 3.175 | 17 | 4.0mm gold |